Wireline Logging: Injection Profiles

Sample Injection Profile

Injection Profiles are run to determine the health of injector units, monitor fluid dispersion, find and measure out of zone losses and provide a comprehensive picture of the overall activity down hole on an injection well.

We wanted to take a minute to explain a few of the common surveys used in the injection profile package.

If you would like to speak with a customer service specialist about our injection profile services click here to locate a district near you.

Temperature Log

A record of the temperature gradient in a well. The temperature log is interpreted by looking for anomalies, or departures, from the reference gradient. Most anomalies are related to the entry of fluids into the borehole or fluid exit into the formation.

Since the temperature is affected by material outside the casing, a temperature log is sensitive to not only the borehole but also the formation and the casing-formation annulus. Temperature logs have many applications, with the most common being to identify zones producing or taking fluid, to evaluate a cement or hydraulic fracture treatment, and to located lost circulation zones and casing leaks.

Caliper Log

A representation of the measured diameter of a borehole along its depth. Since well-bores are usually irregular, it is important to have a tool that measures diameter at several different locations simultaneously. Such a tool is called a multi-finger caliper. Drilling engineers use caliper measurement as a qualitative indication of both the condition of the well-bore and the degree to which the mud system has maintained hole stability.

This information is crucial to all types of production logging. The actual internal diameter of a well-bore must be known in order for an accurate fluid rate to be calculated.

Gamma Ray Log

A log of the total natural radioactivity, measured in API units. The measurement can be made in both open-hole and through casing. Shales and clay are responsible for most natural radioactivity, so the gamma ray log is often a good indicator of such rocks. The log is also used for correlation between wells, for depth correlation between open and cased hole, and for depth correlation between logging runs.

Radioactive Tracer Log

A method of determining injection-flow profiles by monitoring the reduction in tracer material as it moves down the well. A slug of radioactive tracer is added to the injection fluid. As the slug moves down the well, several gamma ray logs are recorded at well-defined time intervals.

The position of the slug is seen as a large gamma ray peak whose size is proportional to the flow rate. A reduction in the size of the peak indicates a loss of fluid into the formation. Fluid velocity can be calculated from the time interval and the distance the peak has moved using time-slug analysis.

Radioactive tracer logs are used to determine injection-flow profiles and detect channels or leaks. Tracer loss measurements are used mainly to give a general idea of fluid flow.

If you would like to talk with us about wireline service at your location please email sales@renegadewls.com or call (806) 897-0735.


If you would like to see a list of all services we offer, please click here.